Indicating Measuring Instruments, Caliper Gauge 838 EA, 10 mm

Indicating Measuring Instruments, Caliper Gauge 838 EA, 10 mm

Indicating Measuring Instruments, Caliper Gauge838 EA 838 EA Caliper gage 0-10mm0,005 mm depth 35 mm

Ball Measurement Mdk Start
Ball measurement Mdk end
Measuring range up to 10 mm
Measuring range from 0 mm
Product weight
Error limit (mm) 0.015 mm
Nominal Value of
Nominal size
Nominal diameter upto
Nominal diameter mm
For start measuring range
For end measuring range
Measuring face
Throat depth mm
Depth of bore mm

Quantity:

Product Description

Indicating Measuring Instruments, Caliper Gauge838 EA 838 EA Caliper gage 0-10mm0,005 mm depth 35 mm, Electronic Gauge for External Measurement, 838 EA Caliper Guage 0-10mm 0,005mm depth 35mm

Features

Application  Specified measuring programs according to application
Absolute/Relative measuring program
Product Features  
  • High contrast analog and digital LCD.
  • Tolerance is displayed with 2 LEDs.
IP protection category  IP 67

Delivery Scope

Instruction manual
Battery
Test certificate

Technical Data

Ball Measurement Mdk Start
Ball measurement Mdk end
Measuring range up to10 mm
Measuring range from0 mm
Product weight
Error limit (mm)0.015 mm
Nominal Value of
Nominal size
Nominal diameter upto
Nominal diameter mm
For start measuring range
For end measuring range
Measuring face
Throat depth mm
Depth of bore mm
Ball Diameter
Distance of movable anvil
Measuring range
Measuring range up to
Measuring range From
Resolution
Resolution_inch
Readings_mm0.005 mm
Measuring surface diameter
Throat depth inch
Measurement surface radius
Number of setting rings
Measuring depth35 mm
Repeatability mm0.005 mm
Readings/Selectable resolution down to
Repeatability fw (μm)
Hysteresis fu ("μ"m)
Flatness in μm
Size of measuring surface
Manufacturing tolerance diameter from
Manufacturing tolerance diameter end
Length of fixed measuring contact
Length of moving measuring contact19.1 mm
Measuring contact ball diameter mm1.5 mm
Parallel error in μm
Increment
Tooth spans
Error limit Ge
Number of measuring probes
Groove width
Groove depth
Measuring force
Minimum measuring force0.8 N
Maximum measuring force1.2 N

Mounting-o d  
Stop Surface diameter_A  
Connection thread g  
Dimension D  1.5 mm
Dimension L  35 mm
Dimension d1  
Dimension d2  
Horizont shaft_H  
Horizont shaft_L  
Dimension H2  
Dimension Hb  19.1 mm
Dimension Hf  18.6 mm
Dimension A  
Dimension B  
a  
b  
c  
d  
e  
f  
g  
h  
Dimension k  
Dimension l  
Dimension n  
Dimension m  
Dimension p  
Dimension t  
Dimension H1  
   

Downloads