Indicating Measuring Instruments for inside Dimensions, 844 Zk Ball Measurment Mdk Start 16.5 mm

Indicating Measuring Instruments for inside Dimensions, 844 Zk Ball Measurment Mdk Start 16.5 mm

£329.40 excl. VAT

Indicating Measuring Instruments, Indicating Measuring Instruments for inside Dimensions, 844 Zk 844 Kk Probe int. serrationMi=16,5-18,1/D=7,5-10/0,5

Ball Measurement Mdk Start 16.5 mm
Ball measurement Mdk end 18.1 mm
Measuring range up to
Measuring range from
Product weight
Error limit (mm)
Nominal Value of
Nominal size
Nominal diameter upto
Nominal diameter mm
For start measuring range
For end measuring range
Measuring face
Throat depth mm
Depth of bore mm

 

Quantity:

Product Description

Indicating Measuring Instruments, Indicating Measuring Instruments for inside Dimensions, 844 Zk 844 Kk Probe int. serrationMi=16,5-18,1/D=7,5-10/0,5, Anvil for internal serration, 844 Kk Probe int. SerrationMi=16, 5-18,1/D=7,5-10/0,5

Features

Application   For diametrical two ball measurement MdK, to obtain the pitch diameter and conical form of internal gears in any position and at any depth
Product Features  
  • Maximum wear resistance due to carbide ball anvils.
  • Constant measuring force due to built-in spring thus eliminating user influence.
  • Anvils, measuring heads, holder, spacer (intermediate piece) and depth extensions form a very comprehensive modular system which can rapidly be converted to measure further gear sizes.
IP protection category  

Technical Data

Ball Measurement Mdk Start 16.5 mm
Ball measurement Mdk end 18.1 mm
Measuring range up to
Measuring range from
Product weight
Error limit (mm)
Nominal Value of
Nominal size
Nominal diameter upto
Nominal diameter mm
For start measuring range
For end measuring range
Measuring face
Throat depth mm
Depth of bore mm
Ball Diameter 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm, 9.5 mm, 10.0 mm
Distance of movable anvil
Measuring range
Measuring range up to
Measuring range From
Resolution
Resolution_inch
Readings_mm
Measuring surface diameter
Throat depth inch
Measurement surface radius
Number of setting rings
Measuring depth
Repeatability mm
Readings/Selectable resolution down to
Repeatability fw (μm)
Hysteresis fu ("μ"m)
Flatness in μm
Size of measuring surface
Manufacturing tolerance diameter from
Manufacturing tolerance diameter end
Length of fixed measuring contact
Length of moving measuring contact
Measuring contact ball diameter mm
Parallel error in μm
Increment 0.5 mm
Tooth spans
Error limit Ge
Number of measuring probes
Groove width
Groove depth
Measuring force
Minimum measuring force
Maximum measuring force

Mounting-o d  
Stop Surface diameter_A  
Connection thread g  
Dimension D  
Dimension L  
Dimension d1  
Dimension d2  
Horizont shaft_H  
Horizont shaft_L  
Dimension H2  
Dimension Hb  
Dimension Hf  
Dimension A  
Dimension B  
a  
b  
c  
d  
e  
f  
g  
h  
Dimension k  
Dimension l  
Dimension n  
Dimension m  
Dimension p  
Dimension t  
Dimension H1  
   

Downloads