Inductive Probe P2004 M, Inductive Probe P2004 M 10-pack

Inductive Probe P2004 M

Inductive Probe P2004 M standard probe, easily coverted from axial to radial by mounting a slip-on cap

Measuring range from -2 mm
Measuring range up to 2 mm
Lifter / retraction Standard model
Compatibility Mahr-VLDT

 

Quantity:

Product Description

Portable Inspection Electrical Length Measuring Instruments

Inductive Probe P2004 M

Inductive Probe P2004 M standard probe, easily coverted from axial to radial by mounting a slip-on cap and with 12 months warranty. MILLIMAR

Features

Product Features
  • Models with or without compressed-air (pneumatic) lifter or vacuum retraction
  • Measuring pin mounted in ball-bearing guide
  • High linearity over the entire measuring range
  • Excellent electromagnetic shielding (EMC)
  • All probes can be easily converted from axial to radial by mounting a slip on cap, included in the scope of supply
  • Chemical resistance data: resistant to oil, gasoline, water and aliphatics. Moderately resistant to acids, bases, solvents and ozone

Technical Data

Measuring range from -2 mm
Measuring range up to 2 mm
Distance of lower stop MIN -2.2 mm
Distance of lower stop MAX 0 mm
Distance of upper stop MIN 2.2 mm
Lifter / retraction Standard model
Measuring force 0.75 N +/- 0.15 N
Increase in measuring force 0.2 N/mm
Repeatability fw (µm) 0.1 µm
Linearity deviation within +/- 0,5 mm 0.4 µm
IP protection category IP 64
Distance of upper stop MAX 4.4 mm
Sensitivity deviation 0.30%
Hysteresis fu (µm) 0.5 µm
Linearity deviation within +/- 1,0 mm 1.5 µm
Linearity deviation within +/- 2,0 mm 3 µm
Cable length 2.5 m
Working temperature 20 °C
Working temperature MIN 10 °C
Working temperature MAX 55 °C
Operating temperature Min -10 °C
Operating temperature Max 80 °C
Temperature coefficient 0.15 µm/°C
Compatibility Mahr-VLDT

Downloads